Superb detailing built entirely outside of Planemaker! Includes many animated parts and pilot figure.

Choose from flying the FAR Part 103 model (Rotax 447) or experimental model (Rotax 503) with floats. Recovery chute is included in both models. 

This is a brand new build for v8 from the ground up with plans for the real aircraft. You have your choice of interior viewing with panning a detailed virtual cockpit or you can use as switching for viewing. The instrumentation is all easy to read and view as you fly in either switched viewing mode or virtual cockpit mode. You can customize the instrument layout in Planemaker very easily if you would like without any additional artwork. You just merely click and drag items from the instrument panel..

This aircraft complies with FAR Part 103  Ultralight Vehicles

For X-Plane 8.40 and above. 

Click for larger picture. Use your back button to return.

mxsport_pnl.gif (357078 bytes)

The custom instrument is easy to read and edit in Planemaker to your liking

mxsport_vc.gif (165290 bytes)

Enjoy a detailed virtual cockpit or view with 2D switching on the keyboard or joystick

mxsport_a.gif (92115 bytes)

Wheel fairings can be installed/removed in Planemaker

mxsport_d.gif (88703 bytes)

mxsport_b.gif (183119 bytes)

mxsport_e.gif (157672 bytes)

mxsport_h.gif (233380 bytes)

mxsport_j.gif (218338 bytes)

 

Specifications:

  • Length: 18' 1"
  • Wing Span: 28' 0"
  • Weight Empty: 254 LBS
  • Weight Max: 525 Lbs
  • Max Payload: 241 Lbs
  • Fuel: 5 Gal
  • Seats: 1
  • Range: 90 mi
  • Maneuver Speed: 54 MPH
  • Max Cruise Speed: 59 MPH
  • Vne: 74 MPH
  • Stall: 27 MPH power off
  • Climb: 850 FPM
  • Engine: Rotax 447 40 HP: Rotax 503 49.6 HP

 

l

Features Include:

  • Detailed virtual cockpit with smooth scrolling or use as switch viewing
  • Custom instrument panel with easy to read instruments
  • Pilot figure
  • Many detail parts
  • Many animated parts
  • Built with real plans from the ground up
  • Real pilot tested and approved
  • Easy to customize instrument panel
  • Easy to paint liveries

 

Notes:    The virtual cockpit is lower in polygon usage to insure good frame rates and still contains nice detail. The aircraft is enhanced to function in both switched interior viewing mode and virtual cockpit mode. The instrument panel is 1024x1024 so you will need to scroll using the arrow keys on the keyboard or assign joystick buttons. The instrument panels are designed for easy reading of instruments. 

The values found flying in the sim should compare within 5% tolerance of real values.

 

Making your own livery:

You can use you favorite paint program to make your own livery very easily. You can use the paint bucket and place your favorite colors at the locations labeled in the ultralight_cockpit.png graphic file. Or, you can repaint as you wish. Be sure to save in .png format with a layer active for transparency.

 

Some Flying Tips:

You will need to steer with your rudder both on the ground and in the water.

Takeoffs and landings are intended to be on grass and not pavement for the float model if not taking off or landing on water.

There is no ground wheel steering

Cruise is intended to be at 5900 RPM

There is no trim. If you fly at cruise speed the aircraft should fly level.

Set wave height less than .5 feet for best results in the water. 

Takeoff and land into the wind.

Approach speed 40 MPH

There is no audible stall indicator. Watch your speed when near the end of the green arc.

 

 

Download File size < 3MB

FREE Updates through v9.99! 

Updates as they occur will be announced at the Site News section of 3pointaircraft.com. A link will be sent to your email address to download. 

Enjoy and thanks for your support